Isuzu GPS Navigation - Setting a New Starting Position for the Route

68
3.4.2 Setting a new starting position for the route
For normal navigation, all routes are planned from the current position. In order to check future
routes, simulate them or see their length in time and distance, you can turn off the GPS receiver.
Then you can set the starting point of the route to a different location than the current GPS position.
1. If you are on the Map screen, tap to return to the Navigation menu.
2. In the Navigation menu, tap .
3. If you already have a route, tap .
If you are starting a new route, tap .
4. The first line is the start of the route, normally the current GPS position. Tap
and confirm your action at the warning message.