81
5 Truck navigation
The navigation software gives more options for truck drivers:
Warnings are both visual and audible. There are different kinds of warnings:
Please note that truck navigation is only as accurate and comprehensive as the
restrictions received with the map. Restrictions may not cover lower priority roads
and in most cases the coverage changes as you move around your map region.
You are obliged to always obey the restrictions displayed on the road.
Note!
● Restricted road segments are excluded from your routes but in some cases some
restricted roads need to be used to reach the given destination. In this case you receive
a warning and you must accept that you have restricted roads in your route or you can
stop the navigation and continue without an active route.
● When approaching a restricted road segment without a route, you are warned that there
is a restricted area ahead.
● You can use countdown timers to alert you when compulsory breaks must be taken
(timers can be set for one driver or two alternate drivers)
● By using the button in the vehicle profile, you can even forbid
turning back on divided roads.
● When selecting truck as the vehicle type, U-turns are disabled from routes as much as
possible.
● You can set a waiting (loading) time for each destination of the route. This way the arrival
time calculation can take into account the idle times at intermediate destinations.
In addition, time dependent restrictions can also be considered for the whole route.
● Based on the dimensions and other entered parameters of your vehicle, Isuzu navigation
warns you when you are approaching a restricted road segment or such roads must be
used in your route.
● You can enter the parameters of your vehicle and Isuzu navigation calculates your routes
with taking available weight, height, etc. restrictions into account (this feature is accurate
only if restrictions are available for all roads between your position and the destination)
To Next Page
Loading...