95
Maps may contain information about the speed limits of the road
segments. Isuzu navigation is able to warn you if you exceed the
current limit. This information may not be available for your region
(ask your local dealer), or may not be fully correct for all roads in the
map.
The maximum speed set in the vehicle profile is also used for this
warning. Isuzu navigation alerts you if you exceed the preset value
even if the legal speed limit is higher.
This setting lets you decide whether you wish to receive visible and/or
audible warnings.
Adjust the slider to set the relative speed above which the application
initiates the warning.
The following alert types are available:
● Audio warning: you receive a verbal warning when you exceed the
speed limit with the given percentage.
●
Visual warning: the current speed limit is shown on the map when
you exceed it.
If you prefer to see the speed limit sign on the map all the time
(normally it is shown only if your speed exceeds it), you can set it here.
This feature allows you to receive a warning when approaching a Road
Safety Camera or other alert points like school zones or railroad crossings.
You must ensure on your own liability that using this feature is legal in
the state where you intend to use it.
You can set the alert for the different alert point categories individually.
The following alert types are available:
● Audio warning: beeps can be played (natural voice) or the type of
the alert can be announced (TTS) while you are approaching one
of these points, and an extra alert can warn you if you exceed the
given speed limit while approaching.
●
Visual warning: the type of the alert point, its distance and the
related speed limit appear on the Map screen while you are
approaching one of these cameras.
For some of the alert points, the enforced or expected speed limit is
available. For these points, the audio alert can be different if you are
below or above the given speed limit.
● Only when speeding: The audio alert is only played when you
exceed the given speed limit.
●
When approaching: The audio alert is always played when
approaching one of these alert points. In order to draw your
attention, the alert is different when you exceed the speed limit.
Maps may contain driver alert information. Tap this button to turn on or
off these warnings and to set the distance from the hazard to receive the
warning at. These can be set individually for the different warning types.
To Next Page
Loading...