ITech IT-M3131D - Page 94

Specification
Parameter Model: IT-M3132D CH1/CH2
Current ≤0.05% + 0.2%FS
Power ≤1% + 1%FS
Resistance \
Read Back Accuracy
Voltage
≤0.03% + 0.02%FS
Current ≤0.05% + 0.2%FS
Power ≤1% + 1%FS
Ripple (20hz-20Mhz) Vpp ≤40mVpp(MAX: ≤60mVpp)
Ripple (20hz-300Khz)
Vrms ≤8mV
Irms ≤8mA
Setup Temperature Coeffi-
cient (％of Output+Offset)/
℃
Voltage
≤0.005% + 0.5mV
Current ≤0.005% + 0.5mA
Read Back Temperature
Coefficient (％of Output
+Offset)/℃
Voltage
≤0.005% + 0.5mV
Current ≤0.005% + 0.5mA
Rise Time( no load ) Voltage
≤30ms
Rise Time( full load ) Voltage
≤30ms
Fall Time( no load ) Voltage
≤500ms
Fall Time( full load ) Voltage
≤30ms
Transient Response Time Voltage
≤1ms
AC Input
Voltage 100Vac～240Vac (rated power)
Frequency
50/60Hz
Setup stability-30min (％of
Output +Offset)
Voltage
≤0.01% + 0.01%FS
Current ≤0.1% + 0.2%FS
Setup stability-8h (％of Out-
put +Offset)
Voltage
≤0.01% + 0.015%FS
Current ≤0.1% + 0.25%FS
Readback stability-30min
(％of Output +Offset)
Voltage
≤0.01% + 0.01%FS
Current ≤0.1% + 0.2%FS
Readback stability-8h (％of
Output +Offset)
Voltage
≤0.01% + 0.015%FS
Current ≤0.1% + 0.25%FS
Efficiency
80%
Remote Sense Compensation Voltage
≤2V
Command Response Time
5ms
Power Factor 0.98
Copyright © Itech Electronic Co., Ltd.
83