ITech IT-M3131D User Manual

Quick Reference
NO
Don’t restore the factory default settings.
YES
Restore the factory default settings.
System
Info
View the system information.
Model
Display the instrument model.
Version Instrument version information.
Main
Display the main firmware version.
Comm
Display the communication board version.
Sub1
Display the version of the control board for chan-
nel 1.
Sub2
Display the version of the control board for chan-
nel 2.
SN Display the serial number.
Last Cal Display last calibration date.
1.7.3 Protect Function Menu Reference
Press [Shift]+[Esc] (Protect) to enter into the protect menu interface.
Protect Protection function menu
U-Max
The maximum output voltage setting value.
U-Min
The minimum output voltage setting value
OVP
Over-voltage protection.
Off Turn the OVP function off.
On Turn the OVP function on.
Level
Over-voltage limit.
Delay Delay time.
OCP
Over-current protection.
Off Turn the OCP function off.
On Turn the OCP function on.
Level Over-current limit.
Delay Delay time.
OPP
Over-power protection.
Off Turn the OPP function off.
On Turn the OPP function on.
Copyright © Itech Electronic Co., Ltd.
13

ITech IT-M3131D Specifications

General

Brand	ITech
Model	IT-M3131D
Category	Power Supply
Language	English