ITech IT-M3900C Series User Manual

Quick Reference
Speed= High/Low
Loop response
speed setting:
high speed /
low speed
CC
Constant current loop priority mode
Speed= High/Low
Loop response
speed setting:
high speed /
low speed
V-Rise Time/I-Rise Time
= 0.001s
Displays the voltage or current rise time
setting according to the selected priority
mode. If CC priority mode is selected,
the parameter setting of I-Rise Time will
be displayed here.
V-Fall Time/I-Fall Time =
0.001s
Displays the voltage or current fall time
setting according to the selected priority
mode. If CC priority mode is selected,
the parameter setting of I-Fall Time will
be displayed here.
Output Res
Set the internal resistance of the power
supply. This parameter needs to be set
only when Mode is set to CV.
Sink Res
Set the CR function in sink mode. This
parameter needs to be set only when
Mode is selected as CC.
• OFF: Turn off the CR function.
• ON: Turn on the CR function and set
Sink Res. Set Sink Res=0, which
means to turn off the CR function.
On Delay Set the delay time to turn on the output.
Off Delay Set the delay time to turn off the output.
Voltage Max
Set the upper limit of the voltage (de-
fault is the rated voltage of the instru-
ment). Once the voltage upper limit is
modified here, the parameters related
to the voltage setting will be limited by
the upper limit here.
Copyright © Itech Electronic Co., Ltd.
11

ITech IT-M3900C Series Specifications

General

Brand	ITech
Model	IT-M3900C Series
Category	Power Supply
Language	English