ITech IT6000D Series User Manual

Quick Reference
Last+Off
When the instrument is powered on, the instrument will re-
main the same settings as last time you turned off the in-
strument, but the [On/Off] is OFF state.
Sense Set the sense function state.
Off Turn the sense function off.
On Turn the sense function on.
ListTrig Source Set the trigger method for the List files running.
Immediate
Trigger immediately
Manual
Manual trigger
Bus
Bus trigger
External
External trigger
DLogTrig Source Set the trigger method for the data logging.
Immediate
Trigger immediately
Manual
Manual trigger
Bus
Bus trigger
Voltage Voltage trigger
Current
Current trigger
External
External trigger
I/O Set the communication information between instrument and PC.
USB USB communication interface
TMC
USB-TMC protocol
VCP
Virtual serial port
Display as the following format:
baud rate_data bit_parity bit_stop bit.
• Select the baud rate from the following
options: 4800, 9600, 19200, 38400,
57600, 115200
• Select the data bit from the following op-
tions: 5, 6, 7, 8
• Select the parity bit from the following
options: N, O, E
• Select the stop bit from the following op-
tions: 1, 2
LAN
Virtual LAN communication. After selecting
this option, you also need to set the commu-
nication parameters of the LAN, and the
menu items are the same as those in the
LAN menu (see below).
Copyright © Itech Electronic Co., Ltd.
12

ITech IT6000D Series Specifications

General

Brand	ITech
Model	IT6000D Series
Category	Power Supply
Language	English