Quick Reference
• Select the parity bit from the following
options: N, O, E
• Select the stop bit from the following op-
tions: 1, 2
LAN
Virtual LAN communication. After selecting
this option, you also need to set the commu-
nication parameters of the LAN, and the
menu items are the same as those in the
LAN menu (see below).
LAN LAN communication interface
Info View the LAN information.
LAN Status: Down
IP Mode: Disconnect
IP Addr: 0.0.0.0
SubNet: 0.0.0.0
Gateway: 0.0.0.0
DNS1: 0.0.0.0
DNS2: 0.0.0.0
MAC: 8C:C8:F4:40:01:E1
MDNS Status:
HostName:
HostDesc:
Domain:
TCPIP::INSTR:
Socket Port: 30000
IP-Conf
Configure LAN IP information.
IP-Mode
Configure LAN IP mode.
Auto: automatically configure
the address of the instrument.
Manual: manually configure the
address of the instrument.
• IP Addr: 0.0.0.0
Set the IP address.
• SubNet: 0.0.0.0
Set the subnet mask.
• Gateway: 0.0.0.0
Set the gateway address.
• DNS1: 0.0.0.0
Set the preferred address
of the DNS server. If it is not
involved, there is no need
to set it.
• DNS2: 0.0.0.0
Set the DNS server alter-
nate address. If it is not
Copyright © Itech Electronic Co., Ltd.
13
To Next Page
Loading...
Need help?
General
