ITech IT6018C-1500-30 User Manual

Quick Reference
You can press [Esc] to return to the previous menu.
The description of the menu items is shown in the table below.
Beep Set the beeper state.
On
Turn the beeper on.
Off
Turn the beeper off.
PowerOn
Set the power-on state.
Reset
When the instrument is powered on, the instrument will in-
itialize some settings and [On/Off] state.
Last
When the instrument is powered on, the instrument will re-
main the same settings and [On/Off] state as last time
you turned off the instrument.
Last+Off
When the instrument is powered on, the instrument will re-
main the same settings as last time you turned off the in-
strument, but the [On/Off] is OFF state.
Sense Set the sense function state.
Off Turn the sense function off.
On Turn the sense function on.
ListTrig Source Set the trigger method for the List files running.
Manual
Manual trigger
Bus
Bus trigger
External
External trigger
DLogTrig Source Set the trigger method for the data logging.
Manual
Manual trigger
Bus
Bus trigger
External
External trigger
I/O Set the communication information between instrument and PC.
USB USB communication interface
TMC
USB-TMC protocol
VCP
Virtual serial port
Display as the following format:
baud rate_data bit_parity bit_stop bit.
• Select the baud rate from the following
options: 4800, 9600, 19200, 38400,
57600, 115200
• Select the data bit from the following op-
tions: 5, 6, 7, 8
Copyright © Itech Electronic Co., Ltd.
12

ITech IT6018C-1500-30 Specifications

General

Brand	ITech
Model	IT6018C-1500-30
Category	Power Supply
Language	English