ITech IT8731 - Channel Option

Panel function introduction
Copyright © Itech Electronic Co., Ltd. 28
38400
57600
115200
Parity Set
Setup the communication parity
None <Default>
Odd
Even
HANDSHAKE SET
Handshake protocol
None <Default>
CTS/RTS
XON/XOFF
EXIT
GPIB ADDRESS
GPIB address setting
GPIB ADDRESS SET
Setup communication adress
Ethernet Set
Ethernet setting
GATEWAY SET
Gateway setting
IP SET
IP setting
MASK SET
Mask setting
PORT SET
SOCKET port setting
EXIT
Expand Module
On
Enable this function
Off <Default>
Disable this function
Language Set
Production protocol
SCPI〈DEFAULT〉
SCPI protocol
EXTEND TABLE
Expand SCPI protocol, compatible with others
About
Main module production information
IT8700
Main frame production model number
VER: X.XX
Main frame software version
SN: XXXXXXXXXXXXX
Main frame production serial number
EXIT
Automatic test menu
Press + key to enter the menu function.
PROGRAM
RUN PROGRAM
Run the testing flie
RECALL PROG
Recall the testing file
EDIT PROGRAM
Edit the testing file
EXIT
3.1.3 Channel option
IT8702/IT8701P/IT8702P can switch the channel. There’re 3 ways to switch
channel:
⚫ +number key to switch channel.
⚫ Press / key to switch.
⚫ When in SETUP menu, you can directly press the number keys to switch.
ShiftShift
66
ChanChan
ChanChan
▲▲
▼▼