*1 Dynamically allocate power. The maximum power of single channel is 250W. The total power
of both channels is less than or equal to 300W. The average power of each channel is 150W.
*2 The voltage/current input is no less than 10% FS (FS= Full Scale)
*3 The scope of read-back resistance is ( 1/(1/R+(1/R)*0.01%+0.08),1/(1/R-(1/R)*0.01%-0.08) )
*4 Dynamically allocate power. The maximum power of single channel is 250W. The total power
of both channels is less than or equal to 300W.
*5 The voltage/current input is no less than 10% FS
*6 Ascending/descending slope: 10%-90% current ascending slope from 0 to maximum current
*7 Minimum rise time: 10%-90% current rise time
To Next Page
