Iteris VersiCam - 2 System Installation Information; System Requirements; Tools and Equipment

5

2 System Installation Information
2.1 System Requirements
TheVersiCamWirelesssystemuses a suiteofsoftwareapplications,TheVersiCamWirelessConsole,for
setupandconfigurationofthesystem.TheseapplicationsrunonaWindowsPC.
PC Minimum Requirements
• PentiumIII1GHzIntelprocessor
• 512MBRAM
• AGPvideocardwith64MBofmemory
• 100MBminimum,250MBrecommendedfreehard‐drivespace
• CD‐ROMreader
• MouseandKeyboard
• 15”monitorwithatleast(800x600)resolutionand16bitcolor
• RS‐232
SerialPort

Operating System and Software
• WindowsXPwithServicePack3(minimum)
• WindowsVistawithServicePack1
• Windows2000withServicePack4
• VersiCamWirelessConsoleversion1.0(fromIteris)
o NetworkSetupTool
o CameraSetupTool
o VRAS(VantageRemoteAccessSystem)
o WiVersiCamSoftwareUpgradeTool
2.2 Tools and Equipment
Tools
• ASmallSlottedScrewdriver
o ForterminatingthewirestoconnectorsontheICC‐2WmoduleandbackoftheCamera
Processorunit.
• ARegularSlottedScrewdriver
o ForadjustingthescrewsontheCameraProcessorunitsunshield.Foradjustingthe
clampstorotatetheCameraProcessor
unithousingbody.
• WireStrippersfor19AWGWire
• Forstrippingtheinsulationonthemulticonductor19gaugestrandedwire.
• WireCutters
o Forcuttingmulticonductorcableandmulticonductorwire.
• AdjustableWrenchandNutDrivers