Solar Powered Installation
Solar Powered Installation
The solar collector or repeater is mounted like other collectors and repeaters, but the
power comes from the solar cabinet which houses the solar controller and batteries. The
following picture shows a typical solar installation with a TCU 100.
Warning Before installing a collector or repeater, ensure that the selected location
can support the weight of the collector or repeater, mounting hardware, solar
panels, and batteries. A thorough structural analysis should be performed by a
registered professional engineer at your desired location prior to installation. Itron
is not responsible for improper installations or for installations, at a site that cannot
adequately support the collector or repeater.
Because of the size and weight of the solar system, Itron recommends more than one
person is present for the installation.
TDC-0971-011 CCU 100 and Repeater 100 Installation Guide 45
Proprietary and Confidential
To Next Page
Loading...