Need help?Do you have a question about the ITRON ChoiceConnect CCU 100 and is the answer not in the manual?
General| Brand | ITRON |
|---|---|
| Model | ChoiceConnect CCU 100 |
| Category | Network Hardware |
| Language | English |
Defines conventions used in the document for clarity and consistency.
Lists other relevant guides and appendices for further information.
Explains the process of configuring a CCU 100 before field installation.
Details the various components of the CCU 100 and Repeater 100.
Describes the main module housing the collector or repeater's internal components.
Covers the external antenna setup for GPS and WAN connectivity.
Details the 900 MHz antenna used for data transmission in the network.
Describes various configurations and locations for CCU/Repeater installations.
Discusses considerations for selecting physical locations for collectors and repeaters.
Outlines the process and importance of a propagation study for site selection.
Details requirements for strong GPS and WAN signal reception for optimal performance.
Specifies the AC power source and circuit requirements for the equipment.
Covers the requirements and considerations for Ethernet backhaul connectivity.
Provides guidelines for optimal placement of remote 900 MHz antennas.
Explains the essential procedures for properly grounding antenna systems.
Provides a step-by-step overview of the recommended installation procedure.
Details how to attach external GPS and WAN antennas to various surfaces.
Covers the procedure for attaching the direct mount 900 MHz antenna.
Explains how to physically mount the collector or repeater unit.
Lists and describes the necessary mounting hardware for different installation types.
Provides instructions for connecting various system cables.
Covers the steps for installing the unit's battery.
Explains how to connect the equipment to a power source.
Details the procedures for installing the CCU in a tower configuration.
Explains how to install the collector or repeater in a solar-powered configuration.
Details the procedure for safely moving and reinstalling the equipment.
Outlines the requirements for safely shipping batteries.
Provides recommendations for storing and charging batteries for maximum lifespan.
Explains how to approximate battery state of charge using a chart.
Details how to charge spare collector and repeater batteries.
Discusses factors affecting battery service life and types of service life.
Provides a step-by-step procedure for replacing the integrated battery.
Lists the physical dimensions and weight of various components.
Provides detailed specifications for the 900 MHz, GPS, and WAN antennas.
Lists the environmental operating and storage conditions for the equipment.
Details the specifications for the collector or repeater transmitter.
Specifies the voltage, frequency, and power operating ranges for the equipment.
Provides specifications for the battery pack used in the system.
Illustrates the network topology for typical Fixed Network installations.
Details the required ports and protocols for Fixed Network operations.
Explains the LED status indicator and its patterns for collector states.
Details the procedure for verifying antenna function and tolerances.
Outlines the steps to access the repeater's user interface.
Provides instructions for changing the repeater's password via the interface.
Details the setup and calibration of the Anritsu Site Master for testing.
Explains how to perform antenna and line sweeping tests for remote antennas.
Clarifies Itron's and the supplier's roles in antenna line sweep procedures.
Covers general requirements, testing methods, and principles for grounding systems.
Details grounding procedures for various installation locations and types.
Outlines the responsibilities of Itron and suppliers for grounding tasks.
To Next Page