Chapter 3 Installing the Collector or Repeater
Attaching the Local GPS/WAN Antennas
You can attach the external GPS and WAN antennas to pipes, poles, walls, and davit
arms. The 3G and 4G pole mount assemblies are shown in the following graphics.
3G GPS/WAN Antenna 4G GPS/WAN Antenna
To attach the local GPS/WAN antennas
1. Assemble the antenna unit as described in the GPS/WAN Remote Antenna Mounting
Kit Assembly Guide included with the GPS/WAN External Antenna Mounting Kit.
2. Attach the GPS/WAN antenna unit coaxial cable, as described in To connect cables
on page 30.
Attaching the Direct Mount Standard (5 dBi) 915 MHz Antenna
Attach the direct mount 900 MHz antenna before mounting the collector or repeater in its
permanent location.
To attach the direct mount standard 5 dBi 915 MHz antenna
Warning Do not install an 8.15 dBi antenna directly on the CCU. Antenna
installation directly on the CCU will compromise mechanical integrity and will not
meet the compliance requirement for a loss of 2.2 dB.
20 TDC-0971-011 CCU 100 and Repeater 100 Installation Guide
Proprietary and Confidential
To Next Page
Loading...