ITRON SL7000 - Page 125

SL7000 User Guide
configuration
……………………
……………………
……………………
Energy register 32*
OBIS code created
dynamically in the
meter during the
configuration of the
corresponding
energy register
‘00000000’
‘Wh’ or ‘kWh’ or
‘MWh’, ‘Varh’ or
‘kVarh’ or ‘Mvarh’,
‘Vah’ or ‘kVAh’ or
‘MVAh’ according
to Energy channel
configuration
Scaler/unit of Active TER
+ Date of scaler/unit programming
‘ACt dAt 1’
DD:MM:YY
‘Wh’ or ‘kWh’ or
‘MWh’
Value of scaler/unit of Active TER
+ Time of scaler/unit programming
‘ACt tIM 1’
HH:MM:SS
‘Wh’ or ‘kWh’ or
‘MWh’
Previous scaler/unit of Active TER
+ Previous date of scaler/unit
programming
‘ACt dAt 2’
DD:MM:YY
‘Wh’ or ‘kWh’ or
‘MWh’
Previous scaler/unit of Active TER
+ Previous time of scaler/unit
programming
‘ACt tIM 2’
HH:MM:SS
‘Wh’ or ‘kWh’ or
‘MWh’
…………………..
…………….
………………
Oldest scaler/unit of Active TER
+ Oldest date of scaler/unit
programming
‘ACt dAt 10’
DD:MM:YY
‘Wh’ or ‘kWh’ or
‘MWh’
Oldest scaler/unit of Active TER
+ Oldest time of scaler/unit
programming
‘ACt tIM 10’
HH:MM:SS
‘Wh’ or ‘kWh’ or
‘MWh’
Fatal alarm status
‘F StAt’
‘00’
(Hexadecimal value)
Non Fatal alarm status
‘nF StAt’
‘000000000’
(Hexadecimal value)