ITRON SL7000 - 9 Installation; Warnings; Environmental

89
9.1. Warnings
DANGER OF ELECTRIC SHOCK
Before and during installation of a meter, observe all requirements given in the Safety information.
In particular:
 Meters must be installed only by suitably-qualified personnel.
 Ensure that the meter supply cabling is isolated from the mains supply, and that the
isolation cannot be overridden by another person.
 Following installation, ensure that the meter covers are correctly fitted and sealed to
prevent user access.
9.2. Environmental
SL7000 meters are certified for indoor use only. Do not install meters outdoors unless they are housed in an
enclosure which can maintain the specified environmental requirements.
Parameter
Range
Temperature
-40° to +70°
Humidity
Up to 95% RH
Environmental protection
IP 51
9. Installation