16
IVT 495 TWIN 9518799
Holiday mode
When leaving your house for a few days or more it
may be worth while lowering the house
temperature.
Using the Setting holiday function you can set
the number of days you are away. This function
decreases the flow temperature in the set heat
curve by 10 degrees (this parameter is adjustable
in 1.13). The temperature is automatically reset to
the previous level at the end of the last day.
1. Press the right button once and the text Set the
house heating here appears on the display.
2. Press the right button once again and the text
Heat more/less range 0-10 appears on the
display.
3. Turn the dial clockwise until Setting holiday
function appears on the display.
4. Press the right button once and the text Set
value: appears on the display.
5. Press the right button (Adjust), the display
now shows the previously set value. Turn the
dial clockwise until the desired number of days
for the holiday function has been set.
6. Press the right button when the required value
has been set (Save). The value is now saved.
Press the left button to return to the main
menu.
Set the house
heating here 1
Heat more/less
range 0-10 1.1
Setting holiday
function 1.12
Set value: 0
Return Adjust
Cancel 0 Save
Temporary heat reduction
USER
To Next Page
Loading...
Need help?
General
