IVT 495 TWIN User Manual

7
IVT 495 TWIN 9518799
The control panel
On the front of the heat pump you can see five lamps, two push
buttons, an on/off button, a dial and a display.
From the outside
1. This lamp is lit when the compressor is in
operation.
2. This lamp is lit when the heat pump uses the
electric element to provide additional heat.
3. This lamp is lit when hot water is being
heated. The lamp blinks during hot water peak
and extra hot water when the compressor has
stopped and only the electric element is
heating the water.
4. This lamp flashes or is lit when a fault has
occurred.
5. This switch is used to turn the heat pump on
and off. This lamp is lit when the heat pump is
on and flashes when it is off.
6. This dial is used to navigate the menus and to
change settings.
7. The display shows information in plain text.
8. Buttons for navigating the menus.
1.
2.
3.
4.
5.
6.
8.
7.
USER

IVT 495 TWIN Specifications

General

Brand	IVT
Model	495 TWIN
Category	Heat Pump
Language	English