Menu overview
6 720 645 504 (2011/04) en
54
Operating times and con-
sumptions
The total operating time for the compres-
sor and additional heat (active connec-
tion). It can also make short term
measurements.
1
Temperatures All connected/acknowledged sensors
present values. The opportunity to cor-
rect the sensors is also given
1
Inputs The status of all connected inputs is dis-
played here. Pressure switches and
motor cut-outs are shown for each heat
pump
1
Outputs All components can be manually oper-
ated individually here to check function
1
Circulation pumps Operation alternative heating circuit
pump G1
1
Operation alternative heat carrier pump
G2
1
Operation alternative collector circuit
pump G3
1
Screed drying Activate 1
Current program step
1
Remaining time for current step
1
Heat source
1
Program settings
Flow temperature increase per heating
step
Number of days per heating step
Maximum flow temperature
Number of days with maximum tempera-
ture
Flow temperature decrease per cooling
step
Number of days per cooling step
1
1
1
1
1
1
Installer
Access
level
Tab. 34 Installer menus
To Next Page
Loading...
