IVT Greenline HC 22 - Additional Heat and Safety Functions; Additional Heat General and Mixed Heat Settings; Collector Circuit Safety Settings

Menu overview
6 720 645 504 (2011/04) en
55
Additional heat
Access
level
Additional heat general Start delay 1
Allow additional heat timer during energy supply
cut-off
1
Additional heat only
1
Ramp time when additional heat only
1
Block additional heat
1
Maximum outdoor temperature for additional
heat
1
Additional heat set point value E11.T1 offset
1
Mixed additional heat Delay mixing valve control after additional heat
start
1
Regulator settings
P constant
I constant
D constant
Minimum PID signal
Maximum PID signal
Mixing valve running time
Connected to output type
1
1
1
1
1
1
1
Hot water electric heater Acknowledge hot water additional heat 1
Temperature change
1
Hysteresis
1
Additional heat program Activate program 1
View/edit active program
1
Outdoor temperature limit for deactivation of
time control
1
Tab. 35 Additional heat menus
Safety functions
Access
level
Setting collector circuit in T10 Lowest permitted temperature E21.T10 1
Lowest permitted temperature E22.T10
1
Hysteresis alarm reset
1
Number of warnings before alarm
1
Setting collector circuit out T11 Lowest permitted temperature E21.T11 1
Lowest permitted temperature E22.T11
1
Hysteresis alarm reset
1
Number of warnings before alarm
1
Tab. 36 Safety functions menus
General
Access
level
Set date 0
Set time 0
Summer/winter time 0
Display backlight intensity 0
Language 0
Country 1
Tab. 37 General menus