Avenger™ Series Technical Manual 7610-003-34-01
Issued: 10-07-2007 Revised: N/A
SECTION 5: PARTS SECTION
45
HTS-11 (SCALE PREVENTION & CORROSION CONTROL DEVICE)
Kleenware HTS-11 System
04730-003-28-03
The HTS-11 must be installed vertically. The provided
bracket is to be secured to the wall. Observe proper
inlet/outlet water directions. Flow directions are mold-
ed into the top of the head. Line pressure should be
released prior to changing cartridges. De-liming of
equipment prior to installation is recommended, but
not required.
Replacement Cartridge
(Inspect at least every 6 months)
04730-003-28-04
Replacement Test Strip
06401-003-28-06
To Next Page
Loading...
