Jackson TEMPSTAR - Unit and Table Dimensions

Tempstar LT/NB/S/SDS Technical Manual 7610-011-86-35
Issued: 12-07-2007 Revised: N/A
SECTION 1: SPECIFICATION INFORMATION
DIMENSIONS TEMPSTAR/TEMPSTAR LT/NB (SIDE MOUNTED CONTROL BOX)
4
25 1/4” (64.1 cm)
32” (81.3 cm)
17 1/2” (44.5 cm)
MACHINE
OPENING
10 5/8”
(27 cm)
34” (86.4 cm)
TABLE
HEIGHT
14”
(35.6 cm)
61 3/4” (156.8 cm)
WATER INLET TO
FLOOR
A- WATER INLET (3/4” NPT)
B- ELECTRICAL CONNECTION POINT
C- DRAIN (1 1/2” NPT)
D- STANDARD CLEARANCE BETWEEN
MACHINE AND WALL (WITH DISHTABLE) IS 4” (10.2 cm).
D
A
B
D
C
15 1/2”
(39.4 cm)
76” (193 cm)
W/ DOOR
OPEN
LEGEND: