CHAPTER 5. INSPECTION AND MAINTAINANCE OF MAJOR PARTS
21
5
7. FILLING DIAGRAM
All the shafts mentioned below have grease fitting on their end. Grease them up periodically. The gear case
should also be serviced periodically for oil replenishment and replacement.
Ref. No. Filling points Lubricants Quantity
1 Bevel gear case (LH) ASSY Gear oil SAE 80 300 cc (0.07 imp.gal.)
2 Bevel gear case (RH) ASSY Gear oil SAE 80 300 cc (0.07 imp.gal.)
3 Coupling Grease As required
4 Gauge wheel ASSY Grease As required
5 Wheel fork ASSY Grease I Inject until greaseoverflows
6 Universal joint ASSY Grease Inject until grease overflows
7 Front arm SET Grease As required
8 Tension arm ASSY Grease Inject until grease overflows
To Next Page
Loading...
Need help?
General
