7
5.0 Standard Programming Functions
5.1 Menu Programs Button
• Follow the steps below to access the programming menus.
Menu button LED display Menu name Menu Function
Press
1x
Primary Filtration
Menu
Allows access to the programming menu for
the primary ltration that uses the circulation
pump. Although the spa has a default setting
this feature is programmable. While in this
menu, you can also program the Change Filter
Timer.
Press
2x
Secondary Filtra-
tion Menu
Allows access to the programming menu for
the secondary ltration that uses Jets Pump
1. These cycles are used to provide additional
skimming. Although the spa has a default set-
ting this feature is programmable.
Press
3x
CLEARRAY Menu
Allows access to the CLEARRAY® bulb re-
placement countdown timer. Your spa is
equipped with the CLEARRAY system that
uses a UV bulb to purify the water. This bulb
must be replaced every year. By programming
the countdown timer, a reminder is displayed
on the topside when it is time to replace the
bulb. The LED screen will ash between “blb”
and the set temperature. Additionally, the
CLEARRAY indicator light will blink. The timer
needs to be reset in order to clear the mes-
sage.
Press
4x
Economy Menu
Allows access to the economy programming
menu. The economy feature has either an “on”
or “off” setting where the heater is allowed to
activate for a maximum of 30 minutes at the
end of each secondary ltration cycle.
Press
5x
Lock Menu
Activates the locking modes to certain compo-
nents, features or operations.
To Next Page
Loading...
Need help?
General