6
UMG 96RM
Incoming goods inspection
The proper and safe operation of this device
requires appropriate transport, proper storage,
installation and assembly as well as careful operation
and aintenance. When it is assumed that safe operation
is no longer possible, the device must immediately be
taken out of operation and secured against accidental
start-up.
Unpacking and packing must be carried out with
the usual care, without the use of force and only with
the use of suitable tools. The devices must be visually
inspected for proper mechanical condition.
It can be assumed that safe operation is no longer
possible if the device, e.g.
• shows visible damage,
• does not work despite intact power supply,
• and was exposed to unfavourable conditions
(e.g. storage outside of the permissible climatic
limits without adaptation to the ambient climate,
condensation, etc.) or transport stresses (e.g. falling
from a great height even without exterior visible
damage, etc.) for prolonged periods.
• Please check that the delivery is complete before you
begin with installation of the device.
C
All supplied screw terminals are
attached to the device.
About these operating instructions
These operating instructions are part of the product.
• Read the operating instructions prior to using
the device.
• Keep the operating instructions at hand throughout
the entire service life of the product and keep ready
for referencing.
• Hand over the operating instructions to each
subsequent owner or user of the product.
To Next Page
Loading...
Need help?
General
