Name: janitza UMG 96-S2
Brand: janitza
Rating: 4 (1 reviews)

To Next Page

To Previous Page

www.janitza.com UMG 96-S2

Subject to technical changes.

The content of our documentation has been compiled with the utmost care and is based on the latest

information available to us. Nevertheless, we would like to point out that the updating of this document

cannot always be performed simultaneously with the further technical development of our products.

Information and speciﬁcations can be changed at any time.

Please consult www.janitza.com for information on the current version.

Table of Contents4
General Information8
- Disclaimer8
- Copyright Notice8
- Technical Changes8
- About this User Manual8
- Defective Device/Disposal8
Safety10
- Presentation of Warning Notices and Safety Instructions10
- Danger Levels10
- Product Safety10
- Dangers When Handling the Device10
- Electrically Qualified Personnel11
- Warranty in the Event of Damage11
Product Description12
- Device Description12
- Incoming Goods Inspection12
- Intended Use12
- Device Characteristics12
- Device Functions12
- Performance Features13
- EC Declaration of Conformity14
- Scope of Delivery14
- Available Accessories14
- Measurement Method14
- Operating Concept14
- Gridvis Network Analysis Software14
- Overview of Range of Functions15
Design of the Device16
- Front View - Display16
- Rear View - Location of the Connections17
- Labeling of the Device - Rating Plate18
Assembly20
- Installation Location20
- Installation Position20
- Fastening20
Network Systems21
Installation21
- Rated Voltages21
  - Three-Phase 4-Conductor Network with Grounded Neutral Conductor21
- Disconnectors22
- Supply Voltage22
- Voltage Measurement23
- Current Measurement24
Connection27
- Connection to a PC27
- RS485 Interface (Serial Interface)27
- Shielding28
- Termination Resistors28
- Bus Structure29
Communication Via the RS485 Interface with the Modbus RTU Protocol30
Digital Output31
- Pulse Output Function31
- Pulse Output Connection Example31
- Pulse Value (Parameter Address 102)31
- Pulse Length (Parameter Address 106) and Pulse Pause32
- Determining the Pulse Value32
Operation and Button Functions33
- Operation33
- Button Functions34
- Parameter (Addresses) and Measured Value Display35
Configuration36
- Connecting the Supply Voltage36
- Programming Mode36
- Password Protection36
- Current Transformer and Voltage Transformer36
- Programming the Current Transformer37
- Programming the Voltage Transformer37
- Programming the Parameters38
- Important Information for Configuration40
Commissioning42
- Connecting the Supply Voltage42
- Connecting the Measured Voltage42
- Connecting the Measured Current42
- Checking the Phase Sequence42
- Checking the Phase Assignment42
- Checking the Power Measurement42
- Checking the Measurement42
- Checking the Individual Powers43
- Checking the Sum Powers43
Measured Value Display and Automatic Display Change Profile44
- Measured Value Displays44
- Automatic Display Change Profile44
- Programming Measured Value Displays Via the Gridvis44
  - Software44
- Overview of Measured Value Displays - Display Profile46
- Overview of Automatic Display Change Profiles50
Connection Example52
Service and Maintenance54
- Repair and Calibration54
- Front Film and Display54
- Device Adjustment54
- Firmware Update54
- Service54
Error Messages55
- Warnings55
- Serious Errors55
- Internal Error Cause Recognition55
- Exceeding the Measurement Range56
- Measurement Range Exceedance Parameter56
- Procedure in the Event of Errors57
Technical Data58
- Function Characteristics60
- Parameter and Modbus Address List62
- Table 2 - Modbus Address List (Excerpt of the Frequently Required Measured Values)63
- Number Formats64
- Note on Saving Measured Values and Configuration Data64
Dimensional Drawings65

Brand	janitza
Model	UMG 96-S2
Category	Measuring Instruments
Language	English

janitza UMG 96-S2 User Manual

Table of Contents

Other manuals for janitza UMG 96-S2

Questions and Answers:

janitza UMG 96-S2 Specifications

Related product manuals