Janome Continental M7 Professional - Using Foot Control; Foot Control Operation Guide

9
Changing the front panel
Setscrew B
Setscrew A
Setscrew A
Setscrew B
Front panel 2
Front panel unit
Front panel unit
To remove:
1. Remove the front cover. (Refer to page 4)
2. Remove the setscrews A (2 pcs.).
Unhook the front panel 2 from the front panel unit and
remove the front panel 2.
3. Remove the setscrews B (4 pcs.) and remove the
front panel unit.
4. Remove the caps (2 pcs.), the nuts (2 pcs.), rotary
encoders (2 pcs.) and remove the front panel unit.
To attach:
1. Follow the steps of removal procedure in reverse.
Cap
Hook
Hook
HookHook
Nut
Cap
Rotary encoderRotary encoder
Front panel 2
Nut