Janome Continental M7 Professional - Sewing with Dual Feed Device; Dual Feed Device Operation; Adjusting Dual Feed Balance; Dual Feed Balance Adjustment

39
Presser foot lifter button
Presser foot lifter stopper position (1)
The distance between the presser foot spring release base and the presser foot lifter
stopper should be in the range of 39.4 mm to 39.8 mm when the presser foot is raised with
the presser foot lifter.
Preparation:
1. Turn the power switch on. Press the presser foot lifter
button to lower the presser foot.
Turn the power switch off.
2. Raise the presser foot with the presser foot lifter.
3. Remove the face plate and top cover. (Refer to
page 1)
4. Cut the cord binder.
5. Remove the setscrews (2 pcs.) of the front bracket.
39.4 to 39.8 mm
Presser foot lifter stopper
Presser foot spring release base
Setscrew
Front bracket
Cord binder
Setscrew