Janome Continental M7 Professional - Thread Cutter Switch; Thread Cutter Switch Setup

10
Changing the LCD unit and LCD supporter plate
To remove:
1. Remove the front cover, front panel 2 and front panel
unit. (Refer to pages 4 and 8)
2. Remove the setscrews A (4 pcs.) and LCD unit.
3. Remove the setscrews B (3 pcs.) and LCD supporter
plate.
To attach:
1. Follow the steps of removal procedure in reverse.
Front panel unit
LCD supporter plate
Setscrew B
LCD unit
Setscrew A
Setscrew A