48
Knee lifter adjustment
To adjust:
1. Attach the knee lifter.
2. Turn the power switch ON while pressing the start/
stop button and the Reverse stitch button to enter the
factory setting mode.
Press the “Knee lifter” key to select the knee lifter
adjusting mode.
3. Attach the knee lifter.
Press the “MEM1” when the knee lifter is free.
4. Push and hold the knee lifter to the right and press
the “MEM2” key.
5. Press the “OK” key.
Knee lifter lever
Knee lifter lever
Knee lifter attached
to the machine
Knee lifter is
moved to the right
Reverse button
Start/stop button
To Next Page
Loading...
