Janome Continental M7 Professional - Standard Accessories; Accessory List and Part Numbers

3
Changing external parts (3)
Thread cutter cover
To remove:
1. Remove the base. (Refer to page 2).
2. Loosen the setscrew B and remove the thread cutter
cover.
To attach:
1. Attach the thread cutter cover with the setscrew B.
Setscrew B
Thread cutter cover
Power supply cover
To remove:
1. Remove the setscrews A (3 pcs) and remove the
power supply cover.
To attach:
1. Attach the power supply cover with setscrews A
(3 pcs.).
Setscrew A
Setscrew A
Power supply cover
Hook