Janome Continental M7 Professional - Important Safety Instructions; Electric Shock Prevention; General Safety Warnings

1
Changing external parts (1)
To remove:
1. Remove the setscrew A and remove the face plate.
To attach:
1. Attach the face plate with the setscrew A.
Face plate
Top cover
To remove:
1. Remove the setscrews B (3 pcs.).
2. Remove the bobbin winder connector 1, bobbin
winder connector 2 and remove the top cover.
* Bobbin winder connector 1 and 2 are located rear
side of the touch panel (LCD screen).
To attach:
1. Insert the bobbin winder connector 1, bobbin winder
connector 2 and x the top cover with setscrews B (3
pcs.).
Setscrew A
Face plate
Top cover
Setscrew B
Setscrew B
Setscrew B
Bobbin winder connector 1
Bobbin winder connector 2