Janome Continental M7 Professional - Essential Parts; Names of Parts Overview; Essential Parts Diagram; Labeled Machine Components

2
Base
To remove:
1. Remove the setscrews B (8 pcs.) and remove the
base.
To attach:
1. Attach the base with the setscrews B (8 pcs).
Setscrew B
Base
Changing external parts (2)
Belt cover
To remove:
1. Remove the top cover. (Refer to page 1)
Remove the caps and setscrews A (4 pcs.) and
remove belt cover.
To attach:
1. Attach the belt cover and tighten the setscrews A
(4 pcs.).
Belt cover
Setscrew A
Setscrew A
Setscrew A
Setscrew A
Hook
Hook
Block of approximately height 2 cm
Cap
Cap
Rubber foot