40
TO ADJUST POSITION OF SOLENOID FOR BOBBIN IDLING PREVENSION LEVER
The distance between the yoke (A) and the snap ring on the plunger (B) should be 3mm (C).
Setscrews (D)
Yoke (A)
3 mm (C)
Plunger (B)
1. Remove the machine base (refer to page 2).
2. Loosen the 2 setscrews (D) and adjust the
distance to 3mm (C) by moving the yoke (A).
3. Tighten the 2 setscrews (D).
4. Attach the machine base.
To Next Page
Loading...
