Janome MC6300P - COVER REMOVAL

5
TO REMOVE COVER
Setscrew (A)
Setscrew (B)
Cover (D)
Cover (D)
Groove (E)
“C” part
[ To remove ]
1. Remove the face plate and top cover (refer to
page 1).
2. Loosen the setscrews (A) and (B).
Remove the cover (D).
[ To attach ]
Reverse the above procedure.
* Take care when removing and attaching the
cover, as the right hand side of cover is held in
position by the “C” part slipping into the groove
(E) of the cover (D).