Janome MC6600 - Tension and Drive System Adjustments; TO REPLACE NEEDLE THREAD TENSION UNIT

THREAD TENSION
RELEASE PLATE (F)
THREAD TENSION
RELEASE ARM (E)
THREAD TENSION
SETSCREW (C)
NEEDLE THREAD
TENSION (UNIT)
TO REPLACE NEEDLE THREAD TENSION UNIT
[TO REMOVE]:
1. REMOVE THE FACE PLATE.
2. LOOSEN THE SETSCREWS (A) AND (B).
REMOVE THE THREAD GUIDE COVER (C).
3. LOOSEN THE HEXAGONAL SOCKET SCREW (D).
4. REMOVE THE TENSION RELEASE PLATE (F) FROM
THE TENSION RELEASE ARM (E).
REMOVE THE NEEDLE THREAD TENSION UNIT (G).
[TO ATTACH]:
5. REVERSE THE ABOVE PROCEDURE.
SETSCREW (A)
HEXAGONAL SOCKET
SCREW (D)
THREAD GUIDE
COVER (C)
SETSCREW (B)
19