Janome MC6600 - Exterior Component Access; TO REMOVE FACE PLATE AND TOP COVER

TO REMOVE FACE PLATE AND TOP COVER
<TO REMOVE>
REMOVE THE SETSCREW (A) TO REMOVE THE
FACE PLATE.
<TO ATTACH>
ATTACH THE FACE PLATE WITH THE SETSCREW
(A).
FACE PLATE
TOP COVER
<TO REMOVE>
1. REMOVE THE SETSCREWS (B) AND (C).
2. PULL OUT THE CONNECTOR (D) OF THE BOB-
BIN WINDER AND REMOVE THE TOP COVER.
<TO ATTACH>
1. CONNECT THE CONNECTOR (D) AS SHOWN
ABOVE. THEN ATTACH THE TOP COVER.
TIGHTEN THE SETSCREWS (B) AND (C).
FACE PLATE
TOP COVER
SETSCREW (B)
SETSCREW (C)
PRESSURE DIAL
WASHER
CONNECTOR (D)
CONNECTOR CASE
SETSCREW (A)
1