Janome MC6600 - Internal Component Replacement; TO REPLACE THREAD GUIDE COVER

TO REPLACE THREAD GUIDE COVER
[TO REMOVE]:
1. REMOVE THE FACE PLATE AND TOP COVER.
2. REMOVE THE SETSCREWS (A) AND (B).
REMOVE THE THREAD GUIDE COVER (C).
[TO ATTACH]:
1. ATTACH THE THRED GUIDE COVER, ENGAGING THE
SLIT WITH THE THREAD GUIDE PLATE (D).
2. TIGHTEN THE SETSCREWS (A) AND (B).
SETSCREW (A)
THREAD GUIDE
COVER (C)
SETSCREW (B)
SLIT
THREAD GUIDE
COVER (C)
THREAD GUIDE
PLATE (D)
5