Janome MC6600 - TO ADJUST THREAD CUTTER SOLENOID

TO ADJUST THREAD CUTTER SOLENOID
THE CLEARANCE BETWEEN THE PLUNGER AND THE TOP OF YORK SHOULD BE
2.5 MM.
1 REMOVE THE BASE.
2 LOOSEN THE SETSCRWS. ADJUST THE YORK SO
THAT THE CLEARANCE BETWEEN THE SNAP RING
E AND YORK IS 2.5MM.
3 TIGHTEN THE SETSCREW.
4 ATTACH THE BELTCOVER.
YORK
PLUNGER
2.5 MM
SET PLATE
SETSCREW
41
2.5 MM
(GAUGE 846-G01)