Janome MC6600 - TO ADJUST BOBBIN DETAINING SOLENOID

TO ADJUST BOBBIN DETAINING SOLENOID
THE CLEARANCE BETWEEN THE BOBBIN DETAINING SOLENOID AND THE TOP OF
YORK SHOULD BE 3 MM.
1 REMOVE THE BASE.
2 LOOSEN THE SETSCRWS. ADJUST THE YORK SO
THAT THE CLEARANCE BETWEEN THE SNAP RING
E AND YORK IS 3MM.
3 TIGHTEN THE SETSCREW.
4 ATTACH THE BASE.
YORK
3 MM
PLUNGER
42
3 MM
(Gauge 860G001)