Janome MC6600 - TO REMOVE BELT COVER AND MACHINE BASE

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
TO REMOVE BELT COVER AND MACHINE BASE
BELT COVER
[TO REMOVE]
1. REMOVE THE SETSCREWS (A), (B) AND (C).
2. REMOVE THE BELT COVER.
[TO ATTACH]
3. ATTACH THE BELT COVER BY INSERTING THE
PROJECTIONS (D), (E) AND (F) AND TIGHTEN
THE SETSCREWS (A), (B) AND (C).
SETSCREW (A)
SETSCREW (C)
BELT COVER
SETSCREW (B)
PROJECTION (F)
PROJECTION (E)
PROJECTION (D)
MACHINE BASE
[TO REMOVE]
REMOVE THE 5 SETSCRWS (A), (B), (C), (D) AND
(E).
[TO ATTACH]
ATTACH THE MACHINE BASE WITH RUBBER
FEET, WASHERS AND THE 5 SETSCREWS (A),
(B), (C), (D) AND (E).
SETSCREW (B)
SETSCREW (A)
SETSCREW (C)
SETSCREW (D)
MACHINE BASE
RUBBER
FOOT
WASHER
SETSCREW (E)
2