Janome Memory Craft 15000 - Page 104

!1 Favorite Stitch Adjustment
If you wish to save the changes to manual stitch settings,
turn on this option by pressing the ON/OFF key.
If this option if turned off, the manual stitch setting will be
cleared when turn the power switch off.
Press the delete icon
!3
to clear the manual stitch setting.
NOTE:
This option is available for all stitches in ordinary
sewing mode except monogram.
!0 Thread Cut after Auto-Lock
The machine automatically trims the threads after sewing
locking stitches when this option is turned on.
!0
!1
!2
!3
!2 Resume Mode
Turn on this option when you wish to resume the last
pattern sewn before turning the power switch off.
When the power is turned on again, the confirmation
message will appear. Press the OK key to resume the
last pattern.
After customizing the settings, press the OK key to
enable the new settings.
NOTE:
Resume data will be cleared under the following
conditions:
•Createdstitchisimportedwiththeimportkey.
•Createdstitchisdeletedwiththedeletekey.
•Createdstitchisdeleted,importedorrenamed
with Horizon Link Suite.
•Theinternalmemoryisformatted.
99