Janome Memory Craft 15000 - Page 107

q
e
q IP Address Settings (network settings)
Turn the DHCP option ON to use DHCP to assign an IP
address.
If you want to configure the network settings manually,
press the DHCP option OFF w, and press the Yes key e
for the Manual option.
The network settings window appears.
Press the arrow r of the item you would like to set,
choosing formIP Address, Subnet Mask or Default
Gateway.
Enter the setting by pressing the numeric keys that
appear under the settings.
Press the arrow again to assign the settings.
Press the OK key t to confirm the network settings.
Press X key y to cancel the settings.
r
u Sewing Machine Name Settings
Press Yes key i to open the sewing machine name
setting screen.
Enter the sewing machine name for the network
identification.
Press the OK key to change the name.
Press X to cancel the settings.
u
i
w
t
y
NOTE:
•YoudonotneedtoturnofftheDHCPoptionand
configure the network settings manually unless you
know the appropriate IP address, Subnet Mask
and Default Gateway for this machine.
•WhenDHCPoptionofMC15000isturnedON,turn
on the DHCP option of your wireless router as well.
o
o Default key
Press Default key o to reset the wireless LAN settings
(factory settings).
102