118
Use care when fueling your motor fuel tanks and/or
propane containers. Make certain your propane tank
is properly fastened in place. This label should be kept
permanently axed to your recreation vehicle.
Some states prohibit propane appliances to be operated dur-
ing travel, especially in underground tunnels. Make sure you know the
laws for the areas where you travel.
Installing Propane Cylinder(s)
1. Connect the 3/8” low pressure hose to the outlet of
the two stage regulator.
2. Attach the regulator with the “Z” bracket on the cen-
ter of the front wall with the vent pointing down.
3. Attach the protective plastic cover to the regulator.
4. The regulator has a 90° elbow that directs the inlet
toward the trailer curbside.
5. Place the cylinder on the bracket provided on the
A-frame and position it so the outlet of the cylin-
der valve is pointed directly outward to the curbside
wall.
6. Attach the 1/4” inverted are x 24” Type 1 pigtail hose
to the regulator inlet and the right hand swivel nut to the cylinder valve.
7. Secure the cylinder to the A-frame bracket using the bolts, nuts and washers provided.
Make sure all fasteners are secured before traveling.
To Next Page
Loading...
