99
Power Converter
The power converter converts 120-volt AC power to useable 12-volt DC power when the
shore power cord is connected to an external power source.
The converter has a built-in protective thermal breaker that will shut it down should over-
heating occur. Overheating can be caused by operating the converter above its maximum
power output for an extended period of time, or by an obstruction to its ventilation air ow.
To reduce converter heat build keep unnecessary 12-volt lights and motors turned “o”.
Keep the converters cooling ns and fan clear of obstructions.
• . Car batteries (CCA
rating) are not designed for RV applications. If doing a lot of dry camping use a
deep cycle battery rated in amp hours only (NO CCA rating).
• If using multiple batteries they must be the same brand and type. Adding more
batteries will provide longer use of DC appliances when not on shore power but
may reduce charging eciency.
• The battery works in conjunction with the converter to supply DC power to the
RV. A battery is typically only necessary if you do a lot of dry camping or have
slideouts and/or a leveling system.
○ The app on your smart device automatically locks out the Motors screen on your
device. You must swipe to unlock the screen in order to operate motors.
○ Only one motor may be operated at a time
○ When a motor is in operation, motor control is disabled on any other device run-
ning the RVMaster app.
Shows the thermostat to control heating and cooling in the RV, and fan speed
Turn lights on and o along with ability to dim certain lighting with sliders.
Shows generator on and o, AGS (auto generator start), battery levels, and fuel levels
Shows Kitchen and bath fans and automatic vents (if equipped). Turn fans on and o and
open and close automatic vents.
General Settings Screen (gear icon at top right corner)
• Check the Bluetooth connection between RVMasterController (touchscreen) and
the RVMasterNode.
• Set your preferred temperature units (Fahrenheit/Celsius)
• Access the AGS Energy settings
• Check the battery condition of any installed Remote control (RVMasterSwitch)
• Access a digital version of the RVMaster owner manual
A detailed explanation of how all the systems and controls work through the touchscreen is
beyond the scope of this manual. Refer to the BMPro RVMaster manual in your warranty
packet for complete operating, setup and programming instructions.
A digital version of the operator manual may be included with the system. On the HOME
screen (upper right corner) press the SETTINGS button (the small Gear icon) then scroll the
screen down with your nger until you see USER MANUAL. Tap on it to open the manual.
To return to the beginning, tap the screen and a drop down appears at the top of the screen.
Select the back arrow at the top left to return to the menu screen. To get back to the display
HOME screen, press the left facing triangle button at the bottom of the screen.
To Next Page
Loading...
