186
The Cube Sofa functions similar to a residential futon. The slanted back pillows oer nu-
merous options as a sofa, along with the ability to extend the cushions for additional sleeping
space.
The dinette is designed to seat up to four adults. Depending on your model, there may be a
storage area in the dinette bench. To access this storage, remove all the cushions and lift up
on the bottom seat support.
The dinette seats that are secured with screws contain factory installed equipment and should
only be accessed by a qualied service technician.
Remove all the cushions from the booth dinette. Lift up the tabletop and remove the detach-
able table legs. Place the tabletop on the ledges provided between the booth dinette benches.
Lay the seat back cushions against the back of the dinette bench. Lay the dinette seat bottom
cushions in between the seat back cushions. The area where the cushions meet should be
slightly raised. Push the raised cushion ends down gently as the cushions are designed to t
snugly. Reverse this process when converting back to the booth dinette.
The free-standing dinette table can be positioned to seat up to four people. To prevent dam-
age, the free-standing dinette chairs should be fastened securely at the dinette table when
you are traveling
To Next Page
Loading...
