185
Dust and wipe clean with soft, damp cloth or chamois, wiping gently. Do not use gritty or
abrasive particle soaps or scouring compound to clean ABS plastic. Avoid using “citrus” or
biodegradable cleaners that contain “D-Limonene” as they may damage plastic materials.
Oil based soaps and cleaners are not recommended. No abrasive
cleaners or alcohol cleansers should be used. If other cleaner solutions are
used, we recommend trying a spot in an inconspicuous area.
Sofa and Dinette
Your recreation vehicle may be equipped with one of the following sofa styles.
The hide-a-bed sofa functions much the same as a regular residential hide-a-bed sofa. To
make the hide-a-bed sofa into a bed, remove the seat cushions and pull the sofa back towards
you rmly and gently. Activate (or deate) the air mattress (if so equipped) using the sup-
plied furniture manufacturer’s instructions. To convert the hide-a-bed back into the upright
sofa position, reverse the process.
The Jack Knife sofa functions much the same as a residential futon. To make the sofa in to
a bed, lift up on the bottom seat cushion and pull it towards you. The sofa back will drop
down to provide a sleeping surface. For additional comfort and to reduce fabric damage,
you may want to place a cover or air mattress (customer supplied) over the sofa when it is
in the sleeping position.
The Trifold Sofa oers very similar features to the traditional hide-a-bed. The following
illustrations detail converting the sofa into a bed.
1. Remove the tri-fold sofa pillows and set aside.
2. Using the strap handle, pull the sleeping surface up, then out.
3. While sleeping surface is up, fold out legs. Extend the sleeping surface until grounded.
4. Once sleeping surface is grounded, fold head board down at.
To Next Page
Loading...
