1 - 1
Section F Transmission
9803/8550
Section F
1 - 1
Roadwheels
Removal
Procedure is the same for all four wheels.
Slacken off the roadwheel retaining bolts A. Then raise and
support the ends of the machine on blocks. Remove the
roadwheels.
Replacement
Replacement is a reversal of the removal procedure.
Tighten roadwheel retaining bolts to the correct torque (see
Section 3, Routine Maintenance).
!!
WARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics or
jacks to support the machine when working under it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-001
Issue 4
Tyres and Wheels
203750
A
To Next Page
Loading...
