4 - 1
The pallet fork frame includes a Rating Plate which gives its
weight and its Safe Working Load.
The forks should always be used in pairs as supplied. Each
fork is stamped with its Part Number and Safe Working
Load.
!!
CAUTION
The Safe Working Load stamped on each fork is for the
fork itself. It is not for the machine to which the fork may
be fitted. Before lifting any load, check the weight of the
load against the Safe Working Load of the machine.
2-4-5-3
Daily Maintenance
1 Clean with the rest of the machine.
2 Oil the spring loaded locking levers A.
3 Grease top rail slots.
4 Check for damage. Repair or replace as necessary.
Remember that the forks must be replaced as a pair.
Section A Optional Attachments
9803/8550
Section A
4 - 1
Issue 1
Pallet Forks
174610
A
To Next Page
Loading...
Need help?
General
